Formulas · free calculator
Bend deduction calculator
What you subtract from the sum of outside flange lengths to get a true flat.
BA = 6.09 mm
BD = 2 × (3 + 2) × tan(90°/2) − 6.09
BD = 3.91 mm
Air-bend figures in mild steel unless stated. Nominal thickness; measure the coil. Values are a starting point — press rating, die condition, material certificate and grain direction move the real number.
Have the actual STEP file measured against these limits — first part freeThe rule
BD = 2 × (R + T) × tan(A / 2) − BA
Bend deduction is the number that reaches the blank size, and the one most shop write-ups get backwards.
What breaks when this is ignored
- Sign flipped, so the blank comes out short and the part is scrap before the first hit.
- BD applied twice for two bends on one flange.
- A flat pattern that never gets checked against the blank envelope — a flat longer than the shear is a forming problem, not arithmetic.
Notes from the floor
- Bend deduction is a property of the bend, not the part. Two identical bends need two deductions.
All eight formulas on paper
The Press Brake Reference prints every table with the arithmetic worked, plus ten field notes. CA$29, PDF.
See the reference